http://www.atalaysondajmak.com Sat, 22 May 2010 21:47:25 +0000 http://wordpress.org/?v=2.8.2 en hourly 1 Hinowa VT3000 Forti http://www.atalaysondajmak.com/en/hinowa-vt3000-forti.html http://www.atalaysondajmak.com/en/hinowa-vt3000-forti.html#comments Sat, 27 Feb 2010 12:27:12 +0000 admin http://www.atalaysondajmak.com/?p=791 vt3000

VT DIAMANT Series

DIESEL ENGINE
Brand, typeYanmar 3TNE88
Cylinders and displacement3/1642 cc
Max. power24,8 kw / 33,8 HP
RPM2500 rpm
Electric start12 volt
Fuel typeDiesel
HYDRAULIC SYSTEM
Pumps, number and type2 var. displ. + 1 gears
Capacity35x2 + 26x1 lt/min
Operating pressure210 bar
UNDERCARRIAGE
Track tension by grease, planetary gear box with axial pistons motors with double displacement
Rubber track width300 mm
Rollers per side4 + 1
Translation speed2,0 / 4,0 km/h
Undercarriage's width1500 mm
ROTATION
Turret's rotation speed10 rpm
Lateral traverse45° sağ – 90° sol
Min. rotation range1600 mm
FRONTAL BLADE
Dimensions1520x350 mm
Max. height380 mm
Max. depth375 mm
PROVISIONS
Diesel tank29 lt
Oil tank34 lt
Hydraulic system (total)65 lt
WEIGHT
Operating weight2970/3080 kg
PERFORMANCE
Tooth ripping force2300 kg
Digging force1940 kg
STANDARD EQUIPMENTbucket 500mm, canopy, working light, hydraulic hammer system, double effect installation, set of tools
]]> http://www.atalaysondajmak.com/en/hinowa-vt3000-forti.html/feed 0 Hinowa VT2500 Forti http://www.atalaysondajmak.com/en/hinowa-vt2500-forti.html http://www.atalaysondajmak.com/en/hinowa-vt2500-forti.html#comments Sat, 27 Feb 2010 11:41:11 +0000 admin http://www.atalaysondajmak.com/?p=785 vt2500

VT DIAMANT Series

DIESEL ENGINE
Brand, typeYanmar 3TNE74-NSR2
Cylinders and displacement3/1006 cc
Max. power17,6 kw / 24 HP 3600 g/dk
Electric start12 volt
Fuel typeDiesel
HYDRAULIC SYSTEM
Pumps, number and type2 var. displ. + 1 gears
Capacity25x2 + 18x1 lt/min
Operating pressure210 bar
UNDERCARRIAGE
Track tension by grease, planetary gear box with axial pistons motors with double displacement
Rubber track width250 mm
Rollers per side4 + 1
Translation speed2,0 / 3,5 km/h
Undercarriage's width1120/1420 mm
ROTATION
Turret's rotation speed11 rpm
Lateral traverse45° sağ – 90° sol
Min. rotation range1400 mm
FRONTAL BLADE
Dimensions1120x280 mm
Max. height260 mm
Max. depth375 mm
PROVISIONS
Diesel tank30 lt
Oil tank30 lt
Hydraulic system (total)45 lt
WEIGHT
Operating weight2380/2500 kg
PERFORMANCE
Tooth ripping force1900 kg
Digging force1532 kg
STANDARD EQUIPMENTbucket 500mm, canopy, working light, hydraulic hammer system, double effect installation, set of tools
OPTIONALSSteel tracks, cabin with heating and ventilation, system for bush-cutter, demoliton hammer, auers, different buckeft
]]> http://www.atalaysondajmak.com/en/hinowa-vt2500-forti.html/feed 0 Hinowa Tracked Forklift TP1600 http://www.atalaysondajmak.com/en/hinowa-paletli-forklift-tp1600.html http://www.atalaysondajmak.com/en/hinowa-paletli-forklift-tp1600.html#comments Sat, 27 Feb 2010 11:16:45 +0000 admin http://www.atalaysondajmak.com/?p=779 tp1600

Tracked forklift TP1600  with elevating system of the load and Hydraulic widening (1240 / 1800)

Engine typeHonda GX390
Pistons and displacement1 / 389cc
Maximum gross power13 CV / 3600 rpm
RPM3600 rpm
Translation on speed speed1,5 / 2,2 km/h
Operating weight without operator1330 kg
Max. capacity1600 kg
]]> http://www.atalaysondajmak.com/en/hinowa-paletli-forklift-tp1600.html/feed 0 Hinowa Miniescavatore TT1350 http://www.atalaysondajmak.com/en/hinowa-mini-ekskavator-tt1350.html http://www.atalaysondajmak.com/en/hinowa-mini-ekskavator-tt1350.html#comments Sat, 27 Feb 2010 10:06:08 +0000 admin http://www.atalaysondajmak.com/?p=772 tt1350

DIESEL ENGINE
Brand, typeYanmar 3TNE68 ECSF
Cylinders and displacement3 / 784 cc
Max. gross power12,9 kw 3000 rpm
Installed power10 kw 2300 rpm
Electric start12 volt
Alternator12 volt / 40 A
HYDRAULIC SYSTEM
Pumps, number and type2 pistons pump + 1 gears pump
Capacity2x15 lt/min + 1x13 lt/min
Operating pressure210 bar
UNDERCARRIAGE
Track tension by grease, planetary gear box with hydraulic orbital motors, 2 speeds
tracks' width200 mm
Roller per side3 + upper guide
Translation speed1,8 / 3,6 km/h
Hydraulic widening960 – 1260 mm
Blade's widening980 mm
ROTATION
Turret's rotation speed9,5 g/min
Lateral slewing80°DX / 50°SX
PERFORMANCE
Weight1350 kg
Digging depth1970 mm
Max. outreach from slew ring's centre3485 mm
Max. unload height3230 mm
Buchet breakout force1170 daN
Digging force740 daN
]]> http://www.atalaysondajmak.com/en/hinowa-mini-ekskavator-tt1350.html/feed 0 Glinik Mining Bits http://www.atalaysondajmak.com/en/glinik-mining-bits.html http://www.atalaysondajmak.com/en/glinik-mining-bits.html#comments Fri, 26 Feb 2010 23:08:11 +0000 admin http://www.atalaysondajmak.com/?p=751 miningbits

              2-1/2″ T1                               2-15/16″ TG                                   5-1/8″ SG

NIUW “Glinik” Sp. z o.o. offers a wide variety of 3-cone rock bits designed for rotary drilling in the mining industry, geophysical and technical drilling. “Glinik” is one of few manufacturers to introduce bits with the very small size of 2-3/8″.

The small size bits by “Glinik” are maanufactured with t.c. insert cutting structure or with steel milled tooth.

The bits have got open bearings and are protected from the loss of cone by means of ring or ball bearing.

The bits with sizes above 4″ have open roller bearings.

]]> http://www.atalaysondajmak.com/en/glinik-mining-bits.html/feed 0 Glinik Steel Milled Tooth Bits 8-1/2″ M1TH http://www.atalaysondajmak.com/en/glinik-steel-milled-tooth-bits-8-12-m1th.html http://www.atalaysondajmak.com/en/glinik-steel-milled-tooth-bits-8-12-m1th.html#comments Fri, 26 Feb 2010 22:57:18 +0000 admin http://www.atalaysondajmak.com/?p=745 steelmilledtoothbits_m1th

GALLERY

glinik_bits_s

  •  
  •  
  •  
  •  

 

  •  
  •  
  •  
  •  

 

 

 

 

 

 

 

  • Formations: Stratified soft and medium-compacted rocks such as: lime clays, arenaceous shales, sandstones with lime binder, conglomerates, porous gypsum, soft anhydrites, marbles with clay-silica binder, marl dolomites, clay siderites, limonites.
  • Cutting structure: Suitably arranged long teeth with low top angle and considerable cone axis offset against the center line of the bit ensure high penetration rates. The teeth are reinforced with hard metal and gage rows are additionally reinforced with tungsten carbide for better gage protection.
]]> http://www.atalaysondajmak.com/en/glinik-steel-milled-tooth-bits-8-12-m1th.html/feed 0 Glinik Steel Milled Tooth Bits 12-1/4″ BM1HXC http://www.atalaysondajmak.com/en/glinik-steel-milled-tooth-bits-12-14-bm1hxc.html http://www.atalaysondajmak.com/en/glinik-steel-milled-tooth-bits-12-14-bm1hxc.html#comments Fri, 26 Feb 2010 22:49:12 +0000 admin http://www.atalaysondajmak.com/?p=741 steelmilledtoothbits

GALLERY

glinik_bits_s

  •  

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Formations: Very soft, unstratified, poorly compacted rocks such as shale clays, poorly compacted clays and sandstones, marl limestones, salts, gypsum, hard coals, iron ores.
  • Cutting structure: high penetration rates are ensured by a considerable offset of cone axis against the center line of the bit and long sharp teeth. The teeth are reinforced with hard metal ensuring appropriate durability. Special shaped of teeth  in the gage rows are designed for respective types of rock ensuring increased penetration rates and efficient bore-hole cleaning for very soft and viscous formations.
]]> http://www.atalaysondajmak.com/en/glinik-steel-milled-tooth-bits-12-14-bm1hxc.html/feed 0 Glinik 3-Jet Flushing http://www.atalaysondajmak.com/en/glinik-3-jet-flushing.html http://www.atalaysondajmak.com/en/glinik-3-jet-flushing.html#comments Fri, 26 Feb 2010 22:40:00 +0000 admin http://www.atalaysondajmak.com/?p=735 3jet_flushing

GALLERY

glinik_bits_s

 

 

 

 

 

 

 

 

 

The spacing of nozzles in bits with 3-jet flushing enables the effective cleaning of both cutting structure and the bottom of a bore-hole. The exchangeable ceramic nozzles ensure choice of optimum sizes of nozzles to meet desired hydraulic parameters of the drilling process. Exchangeable ceramic nozzles are mounted in the seats sealed with O-Ring and fastened with retaining ring. The 3-Jet flushing is used for rock bits sizes ranging from 5-5/8″ to 26″.

]]> http://www.atalaysondajmak.com/en/glinik-3-jet-flushing.html/feed 0 Atalay XA 350 120-150 http://www.atalaysondajmak.com/en/atalay-xa-350-120-150.html http://www.atalaysondajmak.com/en/atalay-xa-350-120-150.html#comments Fri, 26 Feb 2010 21:59:57 +0000 admin http://www.atalaysondajmak.com/atalay-xa-350-120-150.html atalay_120-150

Net total weight (W)11700 Kg
Diesel engine power (P)136 HP
Torque (M)4500 Nm
Rotation speed (n)120-300 Devir/dk.
Travel speed (v)1.65 km/h
Characteristics of drillingAUGER+DTH+Rotary
Drilling capacity (Q)120 çapta 150m derinlik
Drilling length (L)150m
Drill rod (strok+L)3 (HW ile)
Pulling force max. (F)4900 Kg
Drilling thrust max. (F)3900 Kg
Rod holder (F)108 KN
CompressorXA 350 Atlas Copco
]]> http://www.atalaysondajmak.com/en/atalay-xa-350-120-150.html/feed 0 Atalay Drilling Machine 185-150 http://www.atalaysondajmak.com/en/atalay-hyd-karotlu-sondaj-makinesi-185-150.html http://www.atalaysondajmak.com/en/atalay-hyd-karotlu-sondaj-makinesi-185-150.html#comments Fri, 26 Feb 2010 21:30:42 +0000 admin http://www.atalaysondajmak.com/?p=723 atalay_185-150

Net total weight (W)2200 Kg
Elc. engine power (P)55 KW
Torque (M)2380 Nm
Rotation speed (n)100-800 d/d
Characteristics of drillingRotary+DTH+AUGER
Drilling capacity (L)185mm wire-line
Drilling length (L)150m
Drill rodHW, HQ (185mm özel karotiyer)
Drilling thrust max. (F)4900 Kg
Pulling force max. (F)3900 Kg
Rod holder (F)800 Kg/cm2
Hydraulic Chuck
]]> http://www.atalaysondajmak.com/en/atalay-hyd-karotlu-sondaj-makinesi-185-150.html/feed 0